Testing the basic Kamailio IMS setup, as it is described in Installing base Kamailio IMS platform on the debian squeeze - 32bit. We are using test1.local zone, where pcscf.test1.local, scscf.test1.local, icscf.test1.local and hss.test1.local are used.
----------------------------
Installation of openSIPs on Debian(sqeeze) - 32bit:
Edit sources.list to use new repository:
joe /etc/apt/sources.list
deb http://www.opensips.org/apt/ lenny main
This install guide is based on the official install guide from http://www.openimscore.org/installation_guide.
This guide describes the base component installation only. The platform is using four virtual machines, one for each IMS component (PCSCF, SCSCF, ICSCF, HSS).
Boghe IMS client can be used as the SIP client connecting to your IETF SIP network, for example those build up over kamailio.
The client settings, in my case, where I'm using ps.sip.uniza.sk domain with proper DNS and SRV records, it have to be:
In this article we describe how to extend the base Kamailio IMS platform (as is described here) with simple presence service realized over Kamailio SIP server.
Kamailio 3.0 provides a command line interface: sercmd. Sercmd allows to connect to running instance of Kamailio, either on same or remote system.
If we like to use it, we have to first enable the ctl module in kamailio.cfg.
http://tools.ietf.org/html/rfc5118
In present days (start of the 2011) is not so easy to find SIP client which correctly support the using of IPv6. Up to now, with thanks of kamailio usr list, I found only one softphone and it is Linphone. It is quite simple softphone, but for IPv6 testing it is still enough.
To configure Linphone using IPv6 we have to change following:
After some testing I have found another SIP client, which shoud be used for SIP over IPv6 testing. The first one is Linhpone and the second one is IMS Boghe client. Right, Boghe is mainly IMS client, but may be used as an IETF SIP client, which allows to register and use an IETF SIP based network.
To make it working using IPv6 you have to change the following. Start the client and from the main menu choose Tools and Options.
